Journal of Engineering and Environmental SystemsJEES
Home
Articles
Archive
Submit
About
LoginRegister
Back to Articles
Research Article

Solvent-Assisted Thermal Extraction and Molecular Characterization of Natural Bitumen from Beke Oil Sands

Yerbol Tileuberdi
*

•

Ulan Koshken

Published: November 16, 2026

DOI:

10.66973/jees.26.011

Abstract

Oil sands are a potential source of bitumen, and efficient recovery methods are important for their utilization. In this study, bitumen was recovered from Beke oil sands in Kazakhstan using solvent-assisted thermal extraction at 40–50 °C, followed by filtration and atmospheric distillation. The residual bitumen content was 1.576 wt%, indicating effective separation of bitumen from the oil-sand matrix. High-resolution negative-ion ESI FT-ICR MS revealed that the detected molecular species were mainly distributed in the 200–700 Da range. O₂ was the dominant heteroatom class, followed by O₃, O₄, and N₁. The O₂ compounds were mainly distributed at carbon numbers of 16–35 and DBE values of 1–4, while N₁ compounds were mainly distributed at carbon numbers of 20–40 and DBE values of 10–18. These results demonstrate the effectiveness of solvent-assisted thermal extraction and provide molecular-level information on the composition and structural characteristics of Beke oil-sand bitumen.

KEYWORDS
Oil sands
bitumen extraction
solvent-assisted thermal treatment
ESI FT-ICR MS
heteroatom compounds
DBE–carbon number distribution
Files

jees.26.011.pdf
MANUSCRIPT619.14 KB
View Full PDF
Article Details
Journal

Journal of Engineering and Environmental Systems


Issue Info

Volume 2, Issue 1

Pages 159–168


Metrics
58
Views
1
Downloads